|
Our Labor is Still Tax Free!
Here are the regular intervals you should observe
to keep your Harley-Davidson in top-notch shape! You may be getting
near a maintenance interval ... so check out our Service
Specials!
500 Miles Service
1000 Miles Service
2500 Miles Service
5000 Miles Service
7500 Miles Service
10000 Miles Service
500 Miles
For Springer Models FLSTS & FXSTS:As
stated in the owner's manual, FLSTS Heritage Springer Models should
have a front end adjustment at 500 miles.
1000 Miles
- Change engine oil & oil filter.
- Inspect air cleaner and service as required.
- Change primary chaincase lubricant and clean magnetic drain
plug.
- Check / adjust primary chain.
- Check clutch adjustment.
- Change transmission lubricant and clean magnetic drain plug.
- Check and adjust rear drive belt.
- Inspect brake pads and discs for wear.
- Check brake fluid reservoir levels and condition.
- Inspect oil lines and brake system for leaks.
- Lubricate the following: front brake hand lever, throttle
control cables, throttle, clutch control cable/hand lever and
jiffy stand.
- Check, adjust operation of enricher.
- Inspect fuel valve, lines and fittings for leaks.
- Check tire pressure and inspect tread.
- Check and clean battery connections.
- Check operation of all electrical equipment and switches.
- Check stabilizer links and engine mounts.
- Check tightness of all critical fasteners: hand controls,
brake system, axle nuts, front fork components, riser and handle
bar fasteners.
- Check rear fork pivot nut tightness. See Dealer.
- Check engine idle speed adjustment.
- Check front fork bearing adjustment. See Dealer.
- Road test.
back to top
2500 Miles
- Change engine oil & oil filter.
- Inspect rear belt.
- Inspect transmission lubricant and clean magnetic drain plug.
- Inspect brake pads and discs for wear.
- Inspect fuel valve, lines and fittings for leaks.
- Inspect tire pressure and inspect tread.
- Inspect operation of throttle and enricher controls.
- Inspect operation of all electrical equipment and switches.
- Inspect battery connections.
- Inspect air cleaner and service as required.
- Inspect oil lines and brake system for leaks.
- Road test.
back to top
5000 Miles
- Change engine oil & filter.
- Inspect air cleaner and service as required.
- Change primary chaincase lubricant and clean magnetic drain
plug.
- Check/adjust primary chain.
- Check clutch adjustment.
- Change transmission lubricant and clean the magnetic drain
plug.
- Check and adjust belt.
- Lube the speedometer cable.
- Inspect brake pads and discs for wear.
- Check brake fluid reservoir levels and condition.
- Inspect oil lines and brake system for leaks.
- Lubricate the following: front brake hand lever, throttle
control cables, throttle, clutch control cable/hand lever and
jiffy stand.
- Check, adjust operation of enrichener.
- Inspect fuel valve, lines and fittings for leaks.
- Check tire pressure and inspect tread.
- Check wheel spoke tightness.
- Check front fork bearing adjustment.
- Check operation of all electrical equipment and switches.
- Check and clean battery connections.
- Inspect spark plugs.
- Check ignition timing (XL only) and vacuum hose.
- Check engine idle speed adjustment.
- Road test.
back to top
7500 Miles
Same as 2,500 Miles Service
10000 Miles
back to top
- Change engine oil & filter.
- Inspect air cleaner and service as required.
- Change primary chaincase lubricant and clean magnetic drain
plug.
- Check/adjust primary chain.
- Check clutch adjustment.
- Change transmission lubricant and clean the magnetic drain
plug.
- Check and adjust belt.
- Lube the speedometer cable.
- Inspect brake pads and discs for wear.
- Check brake fluid reservoir levels and condition.
- Inspect oil lines and brake system for leaks.
- Lubricate the following: front brake hand lever, throttle
control cables, throttle, clutch control cable/hand lever and
jiffy stand.
- Lubricate and adjust steering head bearings.
- Check engine idle speed adjustment.
- Check, adjust operation of enrichener.
- Inspect fuel valve, lines and fittings for leaks.
- Check operation of all electrical equipment and switches.
- Check and clean battery connections.
- Change spark plugs.
- Check tire pressure and inspect tread.
- Check wheel spoke tightness.
- Check stabilizer links and engine mounts.
- Check tightness of all critical fasteners: hand controls,
brake system, axle nuts, front fork components, riser and handle
bar fasteners.
- Check ignition timing (XL only) and vacuum hose.
- Road test.
back to top
|